CBM CMP-10, Manual

Page: 17 / 23

CITIZEN CMP-10 17
Installing a new battery pack
1. Connect the battery connector.
2. Insert the battery connecting cable into the opening above the battery connector.
3. Insert the battery into its compartment.
4. Place battery cover back by sliding it from the back of the printer.
CAUTION! Be sure to place the battery cover firmly in its position after
installing the new battery pack!
Functions of the CMP-10
Auto Power OFF
Power is automatically cut off after a specified period of timie, during which no command is
sent to the printer and the FFED button has not been pressed. The default manufacturer’s
setting of this time duration is 10 minutes, however, the period can be custom set by the user
with a special command to the printer (see Command Reference List).
The behaviour of the printer after Auto Power OFF is the same as if it were switched off
from the main Power ON/OFF switch.
Interface selection
The interface is automatically selected upon inserting the interface cable connector in
the RS coupling.
- If at POWER ON no cable is connected the IrDA interface is selected by de-
fault.
- If at POWER On the cable is connected the RS-232C interface selection is made..