CBM CMP-10, Manual

Page: 4 / 23

4 CITIZEN CMP-10
i
FOLLOW INSTRUCTIONS STRICTLY
MAY CAUSE DAMAGE TO THE UNIT
· Do not subject the printer to strong impacts or shocks, such as kicking, stamping,
hitting, dropping, and the like.
· Install the printer in well-ventilated places. Do not use it in such a way as to cause
the closure of its ventilation.
· Do not install the device in chemical laboratories, where reactions are expected to
take place or in locations where salts or gases contaminate the air.
· Do not connect/disconnect the power cord or the data cable, while holding the cable
itself!
· Do not pull, install, use, or carry the equipment in a way as to apply excessive force
on the cables.
· Do not drop or insert any external objects, such as clips or pins, into the equipment.
· Do not spill liquids or spray any chemical-containing liquid over the equipment. If
any liquid is spilled on it, turn off the power, disconnect the power cable and power
cord from the mains socket and contact our local dealer.
· Do not disassemble or remodel the equipment. Treatment of this kind may cause fire
or dangerous electric shocks.
· Use the printer only with the specified commercial power supply and AC adapter.
· If you drop or break the AC adapter, or if water or other liquid substances get
inside it, unplug it immediately from the mains socket and contact our dealer.
· Do not damage, break, bend, pull by force or twist the AC adapter cord. Do not put
heavy objects on it or apply excessive heat. The AC adapter may brake and
cause fire, electric shocks, etc. If the AC adapter cord is damaged, contact our
local dealer.
· Do not connect/disconnect the AC adapter with wet hands.
· Do not overload a single electrical outlet, using a table tap or a current tap socket.
· The packing plastic bag of the printer must be kept away from children -
DANGER OF SUFFOCATION!