CBC GANZ Digimaster Series Instruction Manual Download Page 34

Page: 34 / 78

SYSTEM SETUP

SOUND

From the ‘

System Setup

’ menu, click on the ‘

SOUND

’ menu.

SOUND - AUDIO

Click on the

‘AUDIO

’ menu, and click on any field.

Use the button to modify each value.

LIVE AUDIO

: When enabled, the selected audio channel can be monitored from the AUDIO OUTPUT.

DEFAULT AUDIO CHANNEL

: Specify which one of the 4 AUDIO INPUTS is routed to the AUDIO OUTPUT.

NETWORK AUDIO TX

: When enabled, live and playback audio is transmitted to a remote PC connection.

NETWORK AUDIO RX

: When enabled, allows a remote PC connection to send audio back to the DVR.

SOUND - BUZZER

Click on the

BUZZER

menu, and click on any field.

Use the button to modify each value.

KEYPAD

: When enabled, each front panel button keypress is confirmed by a system beep.

All manuals and user guides at all-guides.com

Summary of Contents for GANZ Digimaster Series















































































Search results

Summary of Contents for GANZ Digimaster Series

Reviews:

Related manuals for GANZ Digimaster Series

Brands by name

Popular brands

CBC GANZ Digimaster Series, Instruction Manual

Search results

Summary of Contents for GANZ Digimaster Series

Reviews:

Related manuals for GANZ Digimaster Series

Brands by name

Popular brands