Cawomat 2000 IR, Reference Manual, Page: 54 / 142

1220C GB 19991004
2
Check the roller springs for proper tension.
If they are loose, replace them: refer to chapter 5 ‘Advanced service: instructions for
skilled service personnel’, for the appropriate instructions.
3
Check the upper and lower transport roller drive gears for damage.
If they need to be replaced, refer to chapter 5 ‘Advanced service: instructions for skilled
service personnel’.
4
Check the squeegee roller drive gear for damage (dryer assembly).
If it needs replacement, refer to chapter 5 ‘Advanced service: instructions for skilled ser-
vice personnel’.
5
Check that the developer is not exhausted.
– Drain and clean the developer tank and the replenishment bottle by following the in-
structions in chapter 3, ‘Cleaning the Cawomat 2000 IR’.
– Mix new developer in the replenishment bottle and refill the developer tank: refer to
chapter 2, ‘Getting started with the Cawomat 2000 IR’.
6
Check and, if necessary, adjust the developer replenishment rate.
The procedures for checking and adjusting the developer replenishment rate can be
found in chapter 2, ‘Getting started with the Cawomat 2000 IR’.
50
Troubleshooting
4
1220C Cawomat 2000 IR RM 07-10-99 14:18 Page 50