Cawomat 2000 IR, Reference Manual, Page: 21 / 142

1220C GB 19991004
Installing a fixed water connection
For normal operation the Cawomat 2000 IR processor does not need a separate
water connection. However, it is possible to install a fixed water connection if
continuous water supply is wanted. The fixed water connection accessory can be
ordered as an option.
❖
Refer to Appendix A for order codes and specifications.
1
Remove the fixed water connection accessory from its packing.
2
Install the fixed water connection accessory as shown in the diagram below.
The pressure reducing valve is connected to the water source (1.805 cm / 3/4” pipe with
shut-off valve). The connection is a male union with a 0.953 / 3/8” O.D. thread. Set the
pressure reducing valve to the values as indicated in the diagram.
3
Remove the water replenishment bottle and insert the hose connector into the
water receptacle, marked by a white ring.
Water temperature should be between 5°C and 25°C (40°F and 70°F).
❖
The water line valve should be shut off at the end of a work period. You must have a
fixed floor drain for waste water when using the fixed water connection accessory.
150 mm (5.9")
Outer thread
10 mm (3.8")
200-500 mm (7.8"-10.7")
200 mm (7.8")
Pressure:
max 0.8 bar
Set the flow to
0.2 - 0.25 l/min
Length 5000 mm (107")
17
Installation
1
1220C Cawomat 2000 IR RM 07-10-99 14:17 Page 17