Cawomat 2000 IR, Reference Manual, Page: 15 / 142

1220C GB 19991004
Installation
❖
Refer to page 21 for a diagram of the main components.
Arranging the drain hoses
1
Remove the rubber bands.
Lift the processor and set it down on its rear end with two people. Do not use the legs as
a pivot point. The drain hoses are held in place by rubber bands.
2
Withdraw and unroll the three drain hoses
.
If the processor has been placed as shown above, you see from the left to the right: the
developer hose, the fixer hose and the wash-water hose.
3
Lower the processor back into operating position with two people.
Do not use the legs as a pivot point.
11
Installation
1
1220C Cawomat 2000 IR RM 07-10-99 14:17 Page 11