background image

The mains powered smoke alarm can be used together 
with alarms in the 

CAVIUS™

 Wireless Family range: 

Smoke, Heat, Flood, CO & mains power alarms.  All 
CAVIUS™ interconnected alarms within the Wireless 
Family run on the same frequency and use the same 
data protocol. This means that the wireless system can 
consist of a combination of smoke, heat, flood etc.
Place all alarms into 

‘Learn Mode’

 and repeat  

section 1.
Always test connection to all devices by repeating test 
function section 6 after adding devices.

 

 

10.

 ADD EXTRA DEVICE:

 

HEAT ALARM

SMART REMOTE

FLOOD ALARM

SMOKE ALARM

MAINS POWERE D

SMOKE ALARM

11. 

LOW BATTERY SIGNAL:

Your product has a battery back-up with a 1 year life in 
battery mode without mains power, and up to 10 years 
normal life with mains. However, we recommend to 
replace the battery every 5 years.
When the battery is starting its end of life, a short beep 
will sound out every 48 seconds for 30 days.
Only the alarm with the low battery will sound, no 
other connected alarms will sound. It is safe to change 
batteries in the alarms without going through the learn 
process again – they will not forget the codes during 
the battery change process.

12.

 

BATTERY REPLACEMENT:

To replace the battery, detach the smoke alarm from the 
power supply unit by twisting counterclockwise.
Remove the plastic cover to access the battery.

Replace the battery respecting the polarities. Attach the 
alarm on power supply unit by twisting clockwise until it 
clicks, and test the alarm.

13.

 

MAINTENANCE & TROUBLE SHOOTING:

The smoke alarm should be vacuum cleaned once per 
quarter, to remove dust particles, and it can be wiped 
with a damp cloth. (Do not open the alarm).

NOTE: 

You can easily vacuum clean the smoke chamber 

through the dedicated slot in the top cover, and it’s 
possible to test the alarms by pressing the cover at the 
same time.
High humidity condensing which can be resolved by 
drying the smoke alarm.
 If the smoke alarm does not work when the test button 
is pushed, the probable cause is a power failure. Always 
test the alarm after replacement of battery.
If the problem continues, please visit  

www.cavius.co.nz 

or 

www.cavius.com.au

 

for any trouble shooting.

14. 

OTHER INFORMATION:

Do not paint the alarm.
Disposal: F

or battery and product, please dispose 

properly at the end of life. This is electronic waste which 
should be recycled at an authorised e-waste facility

.

WARNING: 

Please remove dust cover after installation. 

Smoke will not be able to reach the chamber while the 
dust cover is in place.

All Rights reserved: CAVIUS™ Aps assumes no 
responsibility for any errors, which may appear in this 
manual. Furthermore, CAVIUS™ Aps reserves the right 
to alter the hardware, software, and/or specifications 
detailed herein at any time without notice, and 
CAVIUS™ Aps does not make any commitment to 
update the information contained herein. All the 
trademarks listed herein are owned by their respective 
owners. Copyright © CAVIUS™ Aps.

127126 rev 1

MANUFACTURED BY:

                   Aps
Julsøvej 16 - DK8600 Silkeborg 
www.cavius.com - [email protected]
Manufactured in P.R.C. 

DISTRIBUTOR INFORMATION:
New Zealand: 

CAVIUS NANO LTD.

 8 King Street, Te Puke. 3119, 

Bay Of Plenty 3118. P.O Box 11241, Palm Beach Plaza, 
Papamoa, Bay Of Plenty 3151, New Zealand.  

www.cavius.co.nz

  

PH: 

0800 766533

 or 

07 542 219

Australia:

 

REPELEC (AUST)

 

Locked Bag 45, Plumpton, NSW 2761, Australia.  

www.cavius.com.au

 

PH: 

1300 555 586

WARRANTY:

Your CAVIUS™ smoke alarm has a 5 year warranty 
from the date of purchase against defect in material 
and workmanship (excludes the battery). Faulty units 
during this period can be returned to the place of 
purchase. You must provide the proof of purchase date 
and such defects will be repaired, or replaced at the 
distributors option, without charge. This Warranty only 
covers defects in materials or workmanship in normal 
residential use and does not cover damage resulting 
from negligent handling, misuse or lack of reasonable 
care. This warranty is in lieu of any other warranty 
either expressed or implied.

Alarm condition aural signal pattern according to 
ISO 8201.

4

Summary of Contents for 2203-002

Page 1: ...e product MAINS POWERED SMOKE ALARM ISOLATION STRIP 1 NORMAL MODE 2 LEARN MODE 1 2 PLEASE READ THE USER GUIDE CAREFULLY BEFORE INSTALLATION AND RETAIN FOR FUTURE USE Please note The learn switch placed on the back of the alarm can only be in learn position when the alarm is disassembled from the power supply unit The learn switch will automatically switch to normal position when the alarm head is ...

Page 2: ...n of the alarm while the building is under construction The dust cover must be removed after the building is fully cleaned OPTION 1 ALARM MOUNTED ON MOUNTING BASE ON THE CEILING Use the mounting base ring to mark the screw holes on the ceiling For surface wiring pass the feed wire through the mounting base cable holder and screw after termination Connect the 3 wires to the power supply unit Live f...

Page 3: ...rter test all of your alarms to ensure they are operating correctly and are within range of each other It is recommended to check visually every week if the LED flashes correctly every 48sec Press the test button on any alarm for at least 10 seconds This will send out a test signal from the alarm all other connected alarms should receive the signal within a short time The alarms will emit a short ...

Page 4: ...alarm does not work when the test button is pushed the probable cause is a power failure Always test the alarm after replacement of battery If the problem continues please visit www cavius co nz or www cavius com au for any trouble shooting 14 OTHER INFORMATION Do not paint the alarm Disposal For battery and product please dispose properly at the end of life This is electronic waste which should b...

Reviews: