Cavitar C300 Operating Manual Download Page 42 | Manualshive

Page: 42 / 43

Cavitar C300 Operating Manual Download Page 42

40

7 Support and end of life

Support and contact information

It is of utmost importance to Cavitar that Welding Camera will work reliably and offers the
greatest possible benefit to our customers. These objectives have guided the design and
manufacturing of the product. However, if problems occur despite of our efforts, it will be our
first priority to solve these problems as quickly and efficiently as possible.

In case of problems please contact your vendor or Cavitar by email or by telephone.

Cavitar Ltd.
Kuokkamaantie 4 A
FI-33800 Tampere
FINLAND
tel: +358 3 447 9330
email: [email protected]

Our current contact information is available at our website:

www.cavitar.com

End of life

It is not allowed to dispose  Welding Camera as unsorted municipal waste. The system must
be  returned  to  your  vendor  or  to  Cavitar  for  proper  disposal  at  the  end  of  their  life.
Alternatively one can consult local, state and federal regulations for proper disposal.

Welding  camera  contains  Gallium  Arsenide.  Gallium  Arsenide  is  toxic  and  must  not  be
released to the environment.

«
...
40
41
42
43
»

Summary of Contents for C300












































Reviews:

No comments