In order to prevent clutch slipppage (since
the engine oil also lubricates the clutch),
do not mix any chemical additives. Do not
use oils with a diesel specification of “CD
” or oils of a higher quality than specified.
In addition,
do not use oils labeled “ENERGY
CONSERVING II” or higher.
Make sure that no foreign material en-
ters the crankcase.
ral minutes. While warming up, check for
oil leakage. If oil leakage is found, turn
the engine off immediately and check for
the cause.
Final gear oil
Final gear oil measurement
1. Place the machine on a level surface.
2. Remove the oil filler bolt, and then check the
oil level in the final gear case.
NOTE:
The oil level should be at the brim of the filler
hole.
1. Final gear oil
2. Final gear oil filler bolt
3. Proper oil level
oil level and correct it if necessary.
10. Turn the engine off, and then check the
9. Start the engine and warm it up for seve-
108
Summary of Contents for 350ATV
