foam air filter oil to the air filter element.
NOTE:
The air filter element should be wet but not
dripping.
9. Pull the air filter element over its frame, and
then install the lock plate.
10. Install the air filter element assembly.
11. Install the air filter case cover by hooking
the fasteners onto the air filter case.
12. Install the seat.
NOTE:
The air filter element should be cleaned every
20 40 hours. It should be cleaned and lubri-
cated more often if the machine is operated in
extremely dusty areas. Each time the air filter
element maintenance is performed, check the air
inlet to the filter case for obstructions. Check the
air filter case rubber joint to the carburetor and
manifold fittings for an airtight seal. Tighten all
fittings securely to avoid the possibility of unfilt-
ered air entering the engine.
Never operate the engine with the air filter
element removed. This will allow unfiltered
air to enter, causing rapid engine wear and
possible engine damage. Additionally, opera-
tion without the air filter element will affect
carburetor jetting with subsequent poor per-
formance and possible engine overheating.
8. Apply atv foam air filter oil or other quality
118
Summary of Contents for 350ATV
