Edition 04/2007 US, Version A001, Excalibur, Subject to Technical Changes
Page: 6
2.2 Receiver
Warning!
The machine or system to be controlled must be switched off and secured against an
accidental switch-on before the start of the assembly.
Only qualified personnel may perform the work.
2.2.1 Selection of the Place of Installation
The standard receiver is shipped with an internal antenna. Ideally, the transmitter and receiver should
be sited to allow a visual contact between them in order to ensure a perfect communication Screening
by metal construction should be avoided.
Note!
The receiver can be optionally equipped with an external antenna.
2.2.2 Inserting the TransKey in the Receiver
If not already inserted in the receiver, insert the receiver TransKey [yellow], [1] in its holder.
Warning!
The transmitter and receiver TransKeys may not be swapped.
The transmitter TransKey is black.
The receiver TransKey is yellow.
A swapping of the TransKeys results in a fault indication in the transmitter and in the
receiver [see LED blink sequences]. The system will not go into operation.
