Edition 04/2007 US, Version A001, Excalibur, Subject to Technical Changes
Page: 9
3.1.3 Transmitter Blink Sequences [Status Indications] of the Status-LED
Status Indications
Status LED
Action
Normal operation
Blinks green at 1.25 s intervals.
—
Early warning of low
voltage
Blinks red at 1.0 s intervals.
Insert a charged battery within 10
min. or charge the battery.
3.1.4 Switching Off the Transmitter:
⇒
Press 1st step of STOP pushbutton [1] [OFF] or,
⇒
Press 2nd step of the STOP pushbutton [1]
3.1.5 TransKey
The system -specific parameters are activated with the data stored in the TransKey. A label with the ID
address is affixed to each TransKey.
Warning!
Transmitter and receiver TransKeys must not be swapped.
The transmitter TransKey is black.
The receiver TransKey is yellow.
A swapping of the TransKeys results in a fault indication in the transmitter and in the
receiver [see LED blink sequences]. The system will not go into operation.
