Cattani MAXI SMART, Operator'S Handbook Manual

Page: 56 / 152

• Description of the alarms
Alarm code
AC300
DESCRIPTION SOLUTION
00 0 Microcontroller memory alarm Contact technician
I14 2 95% amalgam level exceeded Replace amalgam container as soon as possible
I15 3 100% amalgam level exceeded Replace amalgam container
I00 32 Microcontroller memory alarm Contact technician
I01 33 Short-circuit due to one of the two
motors
Check origin of short-circuit and eliminate it
I02 34 Short-circuit before motor control Contact technician (card probably damaged)
I03 35 Failed capacitor charging Contact technician (replace card)
I04 36 Temperature threshold exceeded Ventilate plant room
I05 37 Blower current limit exceeded Check effi ciency of blower (shutdown or excessive
resistance)
I07 39 Maximum voltage on capacitors
exceeded
Check mains voltage max. 500V
S08 40 Centrifuge short-circuit Remove the short-circuit
S09 41 Short-circuit of card in centrifuge
outlet
Replace the card
S10 42 Instantaneous current centrifuge
exceeded
Eliminate siphons in pipes or check effi ciency of
centrifuge (shutdown or excessive resistance)
S11 43 Delayed current limit of centrifuge
exceeded
Eliminate siphons in pipes or check effi ciency of
centrifuge (shutdown or excessive resistance)
I16 48 Vacuum sensor pipe disconnected Connect vacuum pipe to centrifuge
54