77
board, etc. Do not place it
on electric or gas stoves or
on other appliances that are
a source of heat, or in their
vicinity.
• Do not use the juicer in
motor vehicles, on boats or
outdoors or for purposes
other than those for which
it is intended.
• Before connecting the juicer
to a power socket, make
sure the voltage stated on
its rating label corresponds
to the voltage in your power
socket. Connect the power
cord only to a properly
grounded socket. Unwind
the power cord fully before
using it.
• Do not place heavy items on
the power cord. Make sure
that the power cord does
not hang over the edge
of a table or that it is not
touching a hot surface.
• In order to ensure increased
safety when using electri-
cal appliances, it is recom-
mended to install a residual
current device with a leak-
age current of no more than
30 mA on to the respective
electrical circuit. If your
home is already fitted with
a residual current device,
consider this notification to
be redundant. Request the
further information from
your electrician.
• Make sure that the juicer is
correctly assembled before
putting it into operation.
Use only the manufactur-
er's original accessories.
• The juicer is equipped with
a safe start mechanism. This
means that it cannot be
started unless the juicing
chamber is properly seated
on the motor unit, or un-
less the lid is secured in the
closed position.
• Prior to juicing, remove
from the fruit and vegeta-
bles any hard stones that
are contained in them, for
example, peaches, apri-
cots, mangoes, etc., and
inedible peels, e.g. from or-
anges, pineapples, melons,
YOU SAFETY FIRST AND FOREMOST
Summary of Contents for JS 8010
