Catler JS 8010, Instructions For Use Manual

Page: 20 / 36

20
OPERATING THE JS 8010 JUICER
• To make subsequent cleaning as simple as
possible, the juicer is equipped with an au-
to-clean system that automatically cleans the
strainer and the chamber during the juicing
process. If you wish to juice various types of
ingredients one after another without blend-
ing various flavours together; simply quickly
rinse the juicing mechanism under clean water
without completely disassembling the juicer,
in the following manner: Prior to juicing fur-
ther ingredients, close the juice spout. Pour
400 ml of clean water through the feed tube
into the juicing chamber. Allow the juicer to
run for 15 to 20 seconds and then release the
water into a container located underneath the
juice spout. You may repeat this procedure
one more time. Now the juicing mechanism
is cleaned and you may commence juicing
other ingredients.
• When you have finished using the juicer, we
recommend that you set the reverse motor
direction for a few seconds and flush out any
remaining ingredients from the juicing mech-
anism according to the procedure described
in the preceding paragraph. This will make the
subsequent cleaning of disassembled parts
easier. Then turn off the juicer by setting the
switch to the OFF position and disconnect the
plug from the power socket. Before removing
the juice jug or glass located underneath the
juice spout, close the plug to prevent juice
from dripping.
• After every use, disassemble the juicer accord-
ing to the instructions contained in chapter
Disassembling the JS 8010 juicer, and clean it
out according to the instructions contained in
chapter Cleaning and maintenance.