Catler BM 700, User Manual

Page: 33 / 60

33
CARE AND CLEANING
CARE AND CLEANING
Before cleaning the appliance, always switch it off and unplug the power cord from the mains
socket and allow it to cool down suffi
ciently. The appliance must be cleaned after each use.
WARNING!
DO NOT WASH THE APPLIANCE, MAINS
CORD AND PLUG UNDER RUNNING WATER
AND DO NOT IMMERSE IT IN WATER OR ANY
OTHER LIQUID.
WARNING:
Do not use sharp objects, chemicals, thinners, petrol or other similar substances. Under
no circumstances should the appliance be cleaned with a steam cleaner.
WARNING!
BOTH THE BAKING MOULD AND THE
APPLIANCE HEAT UP DURING USE AND
REMAIN HOT FOR SOME TIME AFTER USE.
ALWAYS USE PROTECTIVE KITCHEN MITTS
WHEN HANDLING HOT MOULD.
BAKING MOULD AND KNEADING HOOK
Pour warm water into the baking mould immediately after removing the bread.
Remove the kneading hook from the bread if it has stuck and place in the water in the mould.
Both the baking mould and the kneading hook are non-stick coated. You should therefore use
mild cleaning agents, soft cloths or sponges.
Wash the baking mould and kneading hook in warm water with a little washing-up liquid
using a soft sponge. Rinse in clean water and wipe dry.
If the ingredients have baked on the bottom of the baking mould and on the kneading hook,
pour warm water into the mould and add a little washing-up liquid. Leave on for a few hours
and then wash off according to the instructions above.