If once the appliance is installed there is access to the
lower part, a protection panel (wooden or something
similar) ought to be placed at the distance indicated in
the figure.
Electrical connection
Prior to carrying out the electrical connection, please
ensure that:
- the plant characteristics are such as to follow what is
indicated on the matrix plate placed at the bottom of
the working area;
- that the plant is fitted with an efficient earth
connection, following the standards and law provisions
in force.The earth connection is compulsory in terms
of the law.
Should there be no cable and/or plug on the equipment,
use suitable absorption material for the working
temperature as well, as indicated on the matrix
plate. Under no circumstance must the cable reach a
temperature above 50°C of the ambient temperature.
Insert in the fixed wiring a mean for disconnection from
the supply mains having a contact separation in all
poles that provide full disconnection under overvoltage
category III conditions, in accordance with the wiring
rules. The plug or omnipolar switch must be easily
reached on the installed equipment.
This appliance is not intended to be used via an external
timer or a remote control system.
The manufacturers decline any responsibility in the event
of non-compliance with what is described above and
the accident prevention norms not being respected and
followed.
To avoid all risk, if the power cable becomes damaged,
it must only be replaced by the manufacturer, by
an authorised service centre, or by a qualified
electrician.
Summary of Contents for TCDO604BV
