background image

Page 20  — English

WARRANTY

Yamaha Motor Corporation, USA, hereby warrants that 
new Yamaha Spark Ignited Small Off Road Engines, here-
after called SORE engines, purchased from an authorized 
Yamaha SORE engine dealer in the continental United 
States and Canada will be free from defects in material and 
workmanship for the period of time stated herein, subject 
to certain stated limitations.

Period of warranty 

— Any new Yamaha SORE engine 

purchased for consumer, commercial, and/or rental use 
from an authorized Yamaha SORE engine dealer in the 
continental United States and Canada will be warranted 
against defects in material or workmanship for a period 
of three (3) years from date of purchase, subject to exclu-
sions noted herein.
During the period of warranty any authorized Yamaha 
SORE engine repair station will, free of charge, repair or 
replace, at Yamaha’s option, any part adjudged defective 
by Yamaha due to faulty workmanship or material from the 
factory. Parts used in warranty repairs will be warranted 
for the balance of the product’s warranty period. All parts 
replaced under warranty become property of Yamaha Mo-
tor Corporation USA.

Emissions warranty 

— emissions-related components 

will be warranted for 3 years regardless of commercial or 
non-commercial use.
General Exclusions from this warranty shall include any 
failures caused by:
a. Installation of parts or accessories that are not qualita-

tively equivalent to genuine Yamaha parts.

b. Abnormal strain, neglect, or abuse.
c. Lack of proper maintenance.
d. Accident or collision damage.

Specific Exclusions from this warranty shall include parts 

replaced due to normal wear or routine maintenance.

The Customer’s Responsibility under this warranty 
shall be to:

1. Operate and maintain the SORE engine as specified in 
the appropriate Owner’s Manual.
2. Give notice to an authorized Yamaha SORE engine 
repair station of any and all apparent defects within ten 
(10) days after discovery, and make the pressure washer 
available at time for inspection and repairs as requested 
by the Yamaha SORE repair station.
An approved Yamaha SORE engine repair station may 
be found by phoning 1-866-788-7398 (USA citizen) 
1-866-788-7397 (Canadian citizen)

Warranty Transfer:

 To transfer the warranty from the 

original purchaser to any subsequent purchaser(s), please 
contact 1-866-788-7398 (USA citizen) 1-866-788-7397 
(Canadian citizen) to find out the necessary procedures. 
In no case will the warranty be extended beyond the 
original period.
Yamaha Motor Corporation, USA makes no other warranty 
of any kind, expressed or implied. All implied warranties of 
merchantability and fitness for a particular purpose which 
exceed the obligation and time limits stated in this warranty 
are hereby disclaimed by Yamaha Motor Corporation, USA, 
and excluded from this warranty.
Some states do not allow limitations on how long an implied 
warranty lasts, so the above limitation may not apply to 
you. Also excluded from this warranty are any incidental 
or consequential damages including loss of use. Some 
states do not allow the exclusion or limitation of incidental 
or consequential damages, so the above exclusion may 
not apply to you.
This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state.

Yamaha Motor Corporation, USA

1-866-788-7398 (USA citizen)
1-866-788-7397 (Canadian citizen)

Yamaha Motor Corporation USA, 
Spark Ignited Small Off-Road Equipment (SORE)
Limited and EPA Emissions Warranty

Summary of Contents for CT80020



































































Reviews: