Page 7 — English
FEATURES
PRODUCT SPECIFICATIONS
Fuel Tank Capacity .......................................................................................................................................................1.8 gal
Engine Oil Capacity ....................................................................................................................................................37.2 oz.
Pump Oil Capacity .....................................................................................................................................................10.5 oz.
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 3,800 psi
Maximum Gallons Per Minute* ...................................................................................................................................3.5 gpm
Maximum Inlet Water Temperature ................................................................................................................................
104˚F
*Max. rating determined by PWMA Standard 101
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the pressure washer and in this operator’s
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
FUEL TANK
This fuel tank has a maximum capacity of 1.8 gal. Use
unleaded automotive gasoline in the engine.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back
of the machine using the stretch strap to secure in place.
IDLE DOWN
The engine idle speed is automatically reduced when the
trigger is released. This feature increases fuel efficiency,
reduces the noise level, and decreases wear and tear over
the life of the pressure washer.
LOW OIL SENSOR
The low oil sensor will light and the engine will automatically
shut off whenever the lubricant level in the engine becomes
low.
ON/OFF SWITCH
The on/off switch is used in combination with the recoil starter
to start the engine. It is also used to turn the engine off.
PRESSURE REGULATOR KNOB
The pressure regulator knob regulates the outgoing pressure
from the pump to the high pressure hose.
RECOIL STARTER
The recoil starter is pulled to start the machine.
SPARK ARRESTOR
This engine is not factory equipped with a spark arrestor.
In some areas it is illegal to operate an engine without a spark
arrestor. A spark arrestor is available by calling customer
service for assistance.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of
water. Once the water has drained, the thermal relief valve
will reset itself.
TRIGGER HANDLE
The trigger handle has gripping surfaces that provide added
control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
YAMAHA MZ300 ENGINE
This Yamaha engine enables the pressure washer to achieve
3,800 psi (pounds per square inch) at a rate of 3.5 gpm
(gallons per minute). Please read the engine manual included
with this product.
