Page 8 — English
ASSEMBLY
TOOLS NEEDED
See Figure 2.
The following tools (not included or drawn to scale) are
needed for assembly:
Adjustable Wrench (2)
Phillips Screwdriver
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always disconnect the engine spark plug
wire from the spark plug when assembling parts.
ATTACHING THE WHEEL ASSEMBLY AND
SUPPORT FEET
See Figures 3 - 4.
NOTE:
Never place the pressure washer in any position
other than upright.
Locate 2 support feet, 4 lock nuts, and 4 bolts.
Lift the machine and slide the support feet onto the
machine base.
Secure in place using the bolts and lock nuts.
Repeat with second foot.
Locate 2 axles, 2 hitch pins, 2 washers, and 2 wheels.
Insert the axle through the hole in the center of the wheel.
Slide the washer onto the axle.
Lift the machine and slide the axle into the wheel mount-
ing hole in the machine base as shown.
Push the hitch pin into the hole on the end of the axle to
secure the wheel assembly.
NOTE:
The hitch pin should be pushed into the axle until
the center of the pin rests on top of the axle.
Repeat with the second wheel.
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
NOTE:
This pressure washer is heavy. To avoid back in-
jury, lift with your legs, not your back, and get help when
needed.
Inspect the pressure washer carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the pressure
washer.
If any parts are damaged or missing, please call
1-877-202-1480 for assistance.
PACKING LIST
Pressure Washer
4-Cycle Engine Lubricant
50 ft. High Pressure Hose
Auxiliary Handle
Axle (2)
Bolt (1/4-20 x 1.9 in., Hex Hd.) (4)
High Pressure Hose Storage
Hitch Pin (2)
Injection Hose with Filter
Lock Nut (1/4-20) (8)
Lock Nut (M10) (4)
Quick-Connect Nozzle (4)
Rear Panel
Rubber Grommet
Screw (1.4 in., Phillips Hd.) (4)
Soap Blaster
™
Nozzle
Spray Wand
Spray Wand Holder
Spray Wand Storage Hook
Support Foot (2)
Trigger Handle
Trigger Handle Holder
Trigger Handle Storage Hook
Washer (5/8 in.) (2)
Wheel (2)
Operator’s Manual
