42
3
What you should do next depends on whether or not [ENTER] is displayed at
the far right of the setting you are configuring (the one that is highlighted).
If [ENTER] is displayed:
a.
Press the [ENTER] key.
b.
On the submenu that appears, use [
T
] and [
S
] to move the highlighting to the setting
you want to select.
Example: The following is the submenu that appears when “Display Sequence Setup” is
selected in step 2, above.
c.
Press the [ENTER] key.
z
This will return to the Viewer setup menu.
If [ENTER] is not displayed:
Press the [
W
] or [
X
] key to select the setting you want (so its button is
).
4
Repeat steps 4 and 5 to configure other settings, if you want.
5
After all the settings are the way you want, press the [MENU] key to exit the
Viewer setup menu.
To restore all settings on the Viewer setup menu to their initial factory
defaults
1
Press the [MENU] key to display the Viewer setup menu.
2
Press the [
T
T
T
T
] key to move the highlighting to “Initialize Viewer Setup” and then
press the [ENTER] key.
z
This displays the dialog box shown below.
3
Use the [
S
S
S
S
] key to select “Yes”.
4
To restore all the settings to their initial defaults, press the [ENTER] key.
z
To exit the operation without doing anything, press [ESC] instead of [ENTER].
5
To exit the Viewer setup menu, press the [ESC] key.
Summary of Contents for YP-100 - Presentation Support Tool
Page 112: ...MA0610 B...