Casio SP-1300, Technical Manual

Page: 19 / 41

— 17 —
2. Lubrication
Lubrication is extremely important for preserving the original performance of the printer over a long period
of time.
2-1. Type of oil
The type of oil used has a major influence on the performance and durability of the printer.You should pay
particular attention to the cold temperature properties of the oil. We recommend use of the grease and
lubrication oils listed below for this printer.
2-2. Lubrication method
When lubricating during disassembly or assembly operations, be sure to wash and clean the equipment
well prior to lubrication to remove dirt and dust.
Lubricate the equipment at regular intervals of six months or after every one million lines. Be sure to
lubricate equipment after disassembling or replacing parts when oil has been removed by cleaning.
2-3. Lubrication locations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
No.
Holder frame and Support roller shaft
Shift frame and Pivot shaft
Solenoid base and Trigger assy
Clutch spring and Clutch claw
Locating lever and Shaft
Cam gear unit and Shaft
Base frame and Pivot shaft
Ribbon shaft and Ribbon shaft guide
Worm gear and Worm wheel
Worm wheel and Frame
Contact surfaces between carriage guide stay and carriage
Crisscross grooves and both ends of the drive shaft
Gear 12
×
45
×
0.4 and Gear shaft
Shift frame and cam
Lubrication locations
Type of oil
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
EM-30L
Type of oil Product name Manufacturer
Grease Molykote EM-30L Dow Corning Corp.