manualshive.com logo in svg

Casio QT-6600, Reference Manual

Share
Download
Casio QT-6600 Reference Manual Download Page 129

R-129

QT-6600 Reference Manual

Satellite

Master

Terminal

files

Terminal

files

Consolidation

files

Consolidation

work

1

, 

7

2

4

2

3

6

3-6-3-2. Z collection / consolidation processing

Z collection/consolidation processing is performed as the figure shown below.

1

A Z collection / consolidation command is started up from the master terminal.
The master first locks an objected terminal. (Z lock)

2

Data of the objected terminal file are sent to the master terminal, and are copied to the
consolidation work file.

3

The data in the consolidation work file are reported on the master's printer.

4

The data in the consolidation work file is added to the consolidation file.

5

After the master terminal's processing completes, the same processes described in item

1

 to 

4

 are executed for all other terminals.

6

The data accumulated in the consolidation file are reported on the master's printer.

7

After the above collection processing completes for all terminals, the files of all satellite
terminals are cleared, and then satellite's Z lock statuses are released.

NOTE:

• Even if an error is occurred, or if the processing is terminated, the data to be collected

remains as they are, and Z lock statuses are automatically released. Therefore, retrying
the same operation can be performed.

Summary of Contents for QT-6600

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands