Casio QT-6600, Reference Manual

Page: 123 / 240

R-123
QT-6600 Reference Manual
Satellite Master
Terminal
files
Terminal
files
Consolidation
work
1
2
3
2
Satellite Master
Terminal
files
Terminal
files
Consolidation
work
1
,
4
2
3
2
3-6-1. X/Z collection
This function is used to obtain the counters and totals of the individual terminals.
3-6-1-1. X collection processing
X collection processing is performed as the figure shown below.
1
An X collection command is started up from the master terminal.
2
One objected terminal sends its report data to the consolidation work file of the master.
3
Report data from the objected terminal file are printed out on the master's printer.
4
After processing of the master terminal completes, the same processes described in the
item
1
to
3
are executed for the other terminals. Data will be sent without the clerk
noticing, even when the satellite in the process of registering.
3-6-1-2. Z collection processing
Z collection processing is performed as the figure shown below.
1
When a Z collection command is started up from the master terminal, the master first
locks one objected terminal. (Z lock)
2
The objected terminal sends its report data to the consolidation work file of the master
terminal.
3 Report data from the satellite terminal file are printed out on the master’s printer.
4
The same processes described in the item
1
to
3
are executed for the other terminals.
5
After the processing of the master terminal completes, the data of objected terminal file
are cleared, and then the Z lock of the objected terminal is released.
NOTE:
• When a Z collection is performed, the consolidation data cannot be output. If output of
consolidation data is desired, perform “collection/consolidation” processing described
later.
• Even if an error is occurred, or if the processing is terminated, the data to be collected
remains as they are, and Z lock statuses are automatically released.