manualshive.com logo in svg

Casio QT-6600, Reference Manual

Share
Download
Casio QT-6600 Reference Manual Download Page 101

R-101

QT-6600 Reference Manual

3-3-10. System re-configuration

This command is one procedure of down recovery. It backs the contents of the system
connection table to the original value.
It should be executed under these conditions:
1) After issuing “Open check report”.
2) All terminals are connected and work without any trouble. (Check by system connection

check)

3) No terminal is in registration, collection, consolidation, sending/receiving programs.
4) Activate “System re-configuration” command at the terminal on which the “Cut-off”

icon is lit.

1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.

3. Select “10. System Re-configuration” and press the <YES>

key.

4. Choose the option “YES (Perform system re-configuration)

/ NO (Abort this procedure)” and press the <YES> key.

* Perform “System Recofiguration” operation at the terminal that

shows system error icon 

.

        System Re-configuration

System Re-configuration             

NO

    OK?                            YES

                0.00

ß

MGR  C01      10-10-01 12:34    000000

              Manager Mode
      3.Remote off              

 ↑

      4.Busy Reset
      5.Stock Maintenance
      6.Drawer for Clerk
      7.CHK#(CLK Interrupt)
      8.Order ID Change
      9.Error Log Print
     

10.System Re-configuration

 

 ↓

                0.00

ß

Cut-off Master or Backup master icon

Summary of Contents for QT-6600

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands