Casio QT-2100 Service Manual Download Page 9

Page: 9 / 115

— 7 —

■

When “3. PGM Restore (IN LINE)” is selected

Select one of the following for the Receive PGM.
1. All Data: Eincluding totalizer, CHK, Index&Detail
2. All PGM

Select receive terminal.

Align the cursor and press <YES> key.

When INLINE AUTO PGM normally ended.

When INLINE AUTO PGM abnormally ended.

Notes: There is no retry even when abnormally ended.

In either (normal or abnormal) ending, press <ESC> to
end INLINE AUTO PGM and change to waiting mode.

Receive Data

*All*Data****

PGM Receive from

*MC*#1*******

OK?

*Yes*

Normal End

31-12-96 11:59PM

Receive Data

All Data

PGM Receive from

MC #01

Normal End

31-12-96 11:59PM

Receive Data

All Data

PGM Receive from

MC #01

OK?

YES

Normal End

31-12-96 11:59PM

Summary of Contents for QT-2100




















































































































Search results

Summary of Contents for QT-2100

Reviews:

Related manuals for QT-2100

Brands by name

Popular brands

Casio QT-2100, Service Manual

Search results

Summary of Contents for QT-2100

Reviews:

Related manuals for QT-2100

Brands by name

Popular brands