Casio QT-2100, Service Manual

Page: 59 / 115

— 57 —
Prompt message Meaning
E083 Cannot create Electronic Electronic journal file cannot be created.
jourual file.
Check flash memory.
∗∗∗∗∗∗∗∗∗∗
E105 Check/TBL Tracking Master CHK master down
down. Please call Manager. “
∗∗∗∗
” means ECR logical ID.
YES : Retry for connection.
NO : Remove it from system.
∗∗∗∗∗∗∗∗∗∗
E106 Check/TBL Tracking Backup CHK BM down
master down. Please call “
∗∗∗∗
” means ECR logical ID.
Manager.
YES : Retry for cennection .
NO : Remove it from system.
∗∗∗∗∗∗∗∗∗∗
E107 Both Master&Backup master CHK M/BM down
down. CHK/TBL tracking or “
∗∗∗∗
” means ECR logical ID.
Clerk interrupt is not available.
∗∗∗∗∗∗∗∗∗∗
E108 CHK/TBL Master is removed Master down then take it off from system
from system. “
∗∗∗∗
” means ECR logical ID.
∗∗∗∗∗∗∗∗∗∗
E109 CHK/TBL Backup master is Backup master down then take it off from system
removed from system. “
∗∗∗∗
” means ECR logical ID.
E110 CHK data mismatch between Data mismatch has occurred.
Master and Backup master.
E130 Middle of Pick up or Loan During picking up
Press Cancel Key.
E131 Middle of <Bill Copy> During Bill copy
Press Cancel Key.
E133 Middle of <Media Change> Dutrng Media CHG
Press Cancel Key.
E134 Middle of Clerk Transfer During CLK Trans
Press ESC Key.
E136 Middle of <Separate Check> During SEP CHK
Press ESC key.
E139 Not allowed to be negative by Credit balance error
Minus/Coupon key.
E140 Wrong menu. This sheet holder is prohibited by PGM.
E141 Press <TRAY TOTAL> twice This sheet holder is prohibited by PGM.
before finalization.
E145 Arrangement syntax error. Arrangement syntax error.
E150 Incorrect value entry. Incorrect entry for PGM.
E151 Incorrect key Pressed. Linking is incorrect.
E152 PGM File or Memory number No such file, no such record.
does not Exist.
E164 Employee No. is not Found Employee No. is not set in the Employee File.
in the Employee File.
E165 Employee No. is not Employee has not done CLOCK-IN operation yet.
Clocking-in.
E166 Employee No. is Occupied Employee who has done CLOCK-lN operation attempts
to operate CLOCK-IN again.
E167 Incorrect JOB coad Employee attempts to operate CLOCK-IN with
incorrect JOB code.