background image

E-3

Caution

Batteries

Misuse of batteries can cause them to leak, resulting in 
damage to nearby objects, or to explode, creating the risk of 
fi re and personal injury. Always make sure you observe the 
following precautions.

x

  Use only batteries that are specifi ed for use with this 

product.

x

  Remove batteries from the product if you do not plan to use 

it for a long time.

Keep backup copies of all important data.

Be sure to keep separate copies of important data in a 
notebook or some other location. Malfunction of the product, 
repairs, and dead batteries can cause data stored memory to 
be lost. 

Keep heavy objects off of the product.

Never place a heavy object on top of the product. Doing so can 
cause the object to lose balance and fall, creating the risk of 
personal injury. 

Avoid unstable surfaces.

Never place the product on an unstable table, desk, etc. Doing 
so can cause the product to fall, creating the risk of personal 
injury.

Location

Avoid the locations listed below for the product. Such locations 
create the risk of fi re and electric shock. 

x

  Areas subject to high humidity and large amounts of dust

x

  Food preparation areas or other locations subjected to oil 

steam

x

  Near heaters, on a heated carpet, in direct sunlight, in a 

closed vehicle parked in the sun, and other areas subjected 
to high heat

Caution

Loading and replacing batteries

The springs inside of the battery compartment have sharp 
edges. Take care that you do not touch the springs with your 
fi ngers when loading or replacing batteries. Doing so creates 
the risk of personal injury.

Tape Loading and Tape Replacement Precautions

The cutter has sharp edges. Do not touch the cutter. Touching 
the cutter can cause fi nger cuts.

Display Screen

x

  Never push on the display screen’s LCD panel or subject it 

to strong impact. Doing so can cause the LCD panel’s glass 
to crack, creating the risk of personal injury.

x

Should the LCD panel ever crack or break, never touch the 
liquid inside of the panel. LCD panel liquid can cause skin 
irritation.

x

  Should LCD panel liquid ever get inside your mouth, 

immediately wash out your mouth with water and contact 
your physician.

x

  Should LCD panel liquid ever get into your eyes or onto 

your skin, rinse with clear water for at least 15 minutes, and 
then contact a physician.

High temperature precaution

Never touch the print head or other metal objects near the 
head. These items become very hot, and touching them 
creates the risk of burn injury.

Cutter Precaution

s

Do not insert your fi ngers into the cutter at the tape outlet. 
Doing so creates the risk of fi nger cuts and personal injury.

Summary of Contents for MEP-K10
























Reviews: