E-13
Important!
Do not affi x labels to the types of surfaces listed below.
x
Surfaces exposed to direct sunlight or rain
x
Human or animal skin
x
Walls, utility poles, and other surfaces located on other people’s property
x
Containers used for heating in a microwave oven
Unsuitable Surfaces (Label may not stick.)
x
Rough surfaces
x
Surfaces that are wet, oily, dusty, or covered with other matter
x
Special plastic materials (silicon, polypropylene, etc.)
To feed the Tape
Press
and then
(feed).
This will feed the tape approximately 12 mm.
Part 6 Confi guring Form Settings
Specifying the Text Orientation
Use the procedure below to select printing of either vertical or horizontal text.
Text Orientation
Indicator
Sample
Vertical
Horizontal
None
To specify the text orientation
Press
.
x
Each press toggles between vertical and horizontal text printing.
Specifying the Tape Length
You can specify the tape length for printing, which will also cause the length
of the printed text to change. Available settings are 100% (normal tape
length), 75%, or 50%.
Tape Length
Indicator
Sample
100%
75%
50%
To specify the tape length
Press
.
Each press cycles the setting in the sequence; 100%
➝
75%
➝
50%.
