— 13 —
3 Disassembly/Reassembly
Prior to maintenance work, be sure to observe the following caution:
CAUTION
(1) When the printer is operating satisfactorily, do not unnecessarily disassemble, reas-
semble or adjust the printer. In particular, do not loosen any screws on the compo-
nents.
(2) Check that the printer is in good condition before turning on the power.
(3) Never try to print without register paper in the printer.
(4) Check that the register paper is set properly.
(5) In maintenance work, never leave any parts or screws in the printer.
(6) In disassembly and reassembly, check that any wires and cords are not damaged
and are laid out properly. Handle these wires and cords carefully.
3-1
Tools
The list of necessary tools is as follows:
1. Philips head screwdriver
2. Tweezers
3. Small radio pliers
4. Oil brush
5. Small pincers
3-2
Disassembly procedure
To perform disassembly, reverse the assembly procedure (item 3-3).
Disassemble each part gradually from the frame.
Summary of Contents for MD-910
Page 1: ...DOT PRINTER JAN 1997 MD 910 without price TECHNICAL MANUAL ...
Page 32: ......
Page 33: ...MA0201571A ...
