— 23 —
(22) Apply Froil G-311S to the upper sur-
face of the worm gear and then install
the ribbon drive latch and the latch
spacer and secure them with the push
nut.
Note: When installing these, check the
direction of ribbon drive latch.
(23) Secure the solenoid assembly to the
right of the frame assembly with a
single screw.
(24) Install the reset pulse sensor assem-
bly to the right of the frame assembly
and secure it by bending the notched
section of the right of the frame assem-
bly.
Note: Handle the notched section of
the right of the frame assembly
carefully because it may be dam-
aged if it is bent or turned often.
(25) Secure the PCB terminal assembly to
the front of the frame assembly with
two screws (M2
×
2.5).
Summary of Contents for MD-910
Page 1: ...DOT PRINTER JAN 1997 MD 910 without price TECHNICAL MANUAL ...
Page 32: ......
Page 33: ...MA0201571A ...
