Casio MD-910, Technical Manual

Page: 21 / 33

— 18 —
3-3-4 Setting the main body assembly
(1) Apply Froil G-311S to the gear of the
gear box assembly, the shaft of the
cylinder cam assembly and the teeth,
the opposite of the shaft.
(2) Combine the cylinder cam assembly
with the gear box assembly and install
the cam shaft bushing in the shaft of
the cylinder cam assembly. Then put
block assembled in frame assembly.
Note:
1) When assembling, align the protru-
sion of the gear box assembly with
the hole on the bend of the frame
assembly.
2) After assembling, align the protru-
sion, a whirl-stop of the cam shaft
bushing with the notched hole on
the right of the frame assembly.
(3) Bend the notched section on the left
of the frame assembly to secure the
motor of the gear box assembly.
Note:
1) After securing this, check that the
cylinder cam assembly turns
smoothly. If not, reinstall it.
2) Handle the notched section on the
left of the frame assembly carefully
because it may be damaged if it is
bent and turned often.
(4) Insert the paper feed gear in the shaft
of the cylinder cam assembly.
Note: When inserting the gear, push
the claws of the paper feed gear
until they fully engage with the
shaft grooves.