Casio HA-B30CHG User Manual Download Page 73

Page: 73 / 83

E-71

Connect the bar code reader to the RS-232C interface connector (8-Pin) on the
Handheld Printer Terminal.
There are two models of optional bar code readers available; pen bar code reader DT-
9650BCR and touch bar code reader DT-9656BCR.

Connecting the bar code reader

1. Check that the power is off. If the power is on, always make sure to turn it off by

pressing the power key. Open the cover of the RS-232C interface connector. ( )

2. Insert the plug of the bar code reader

into the connector as shown in the
illustration.( )

Disconnecting bar code reader

Turn off the power of the Handheld Printer Terminal. Unplug the bar code reader.

Connecting a Bar Code Reader
(IT-3000M53E/IT-3000M54E2 only)

IT-3000_E_P53_81.p65

05.4.14, 11:04 AM

Summary of Contents for HA-B30CHG




















































































Search results

Summary of Contents for HA-B30CHG

Reviews:

Related manuals for HA-B30CHG

Brands by name

Popular brands

Casio HA-B30CHG, User Manual

Search results

Summary of Contents for HA-B30CHG

Reviews:

Related manuals for HA-B30CHG

Brands by name

Popular brands