Casio HA-B30CHG User Manual Download Page 66

Page: 66 / 83

E-64

When Using DT-9020ADP

1. Turn off the power of the Handheld

Printer Terminal by pressing the power
key.

2. Plug the AC Adaptor into a wall outlet,

open the jack cover ( ), and then insert
the plug of the AC Adapter into the
charging jack ( ).

3. Charging begins and Indicator 1 on the Handheld Printer Terminal lights red.

Charging is completed when Indicator 1 changes to green. (Charging time is about 8
hours with the power off.)

* The indicator may light even if the battery pack is not installed. Make sure that the

battery pack is installed when charging.

Important!

•

Securely install the battery pack.

•

Charge in a location free of vibrations.

•

Use only the dedicated AC Adaptor (DT-9020ADP/GT-21089-0909-T3) to charge
the battery pack.

•

Turn off the power of the Handheld Printer Terminal when connecting the AC
Adaptor.

•

When the battery pack has been reinstalled with the battery charger still
plugged into the Handheld Printer Terminal, always make sure to first unplug
the battery charger and then plug it in again.

AC Adaptor (DT-9020ADP) Specifications

1. Charging Specifications

Charging Method:

Constant-voltage, constant-current charging (internal charging
circuit)

Charging Time:

Approximately 8 hours (with the power off)

2. Dimensions and Weight

External Dimensions:

Approx. 77(W)

53(D)

42(H) mm

⁄

"H)

Weight:

Approx. 400 g (14.11oz)

AC Adaptor (GT-21089-0909-T3) Specifications (for China only)

1. Charging Specifications

Charging Method:

Constant-voltage, constant-current charging (internal charging
circuit)

Charging Time:

Approximately 8 hours (with the power off)

2. Dimensions and Weight

External Dimensions:

Approx. 86.5(W)

47(D)

32(H) mm

⁄

"H)

Weight:

Approx. 162 g (5.71oz)

Using the AC Adaptor (DT-9020ADP/GT-21089-0909-T3)

IT-3000_E_P53_81.p65

2005.3.29, 5:56 PM

Summary of Contents for HA-B30CHG




















































































Search results

Summary of Contents for HA-B30CHG

Reviews:

Related manuals for HA-B30CHG

Brands by name

Popular brands

Casio HA-B30CHG, User Manual

Search results

Summary of Contents for HA-B30CHG

Reviews:

Related manuals for HA-B30CHG

Brands by name

Popular brands