Casio FX-7400GII User Manual Download Page 225

Page: 225 / 412

8-14

Clear Commands (CLR)

ClrGraph

Function:

This command clears the graph screen.

Syntax:

ClrGraph

Description:

This command clears the graph screen during program execution.

ClrList

Function:

This command deletes list data.

Syntax:

ClrList <list name>

ClrList

Parameters:

list name: 1 to 26, Ans

Description:

This command deletes the data in the list specified by “list name”. All list data is

deleted if nothing is specified for “list name”.

ClrMat

(Not included on the fx-7400G

)

Function:

This command deletes matrix data.

Syntax:

ClrMat <matrix name>

ClrMat

Parameters:

matrix name: A to Z, Ans

Description:

This command deletes the data in the matrix specified by “matrix name”. All

matrix data is deleted if nothing is specified for “matrix name”.

ClrText

Function:

This command clears the text screen.

Syntax:

ClrText

Description:

This command clears text from the screen during program execution.

Display Commands (DISP)

DispF-Tbl, DispR-Tbl*

* (Not included on the fx-7400G

)

No parameters

Function:

These commands display numeric tables.

Description:

• These commands generate numeric tables during program execution in accordance with

conditions defined within the program.

• DispF-Tbl generates a function table, while DispR-Tbl generates a recursion table.

DrawDyna

(Not included on the fx-7400G

)

No parameters

Function:

This command executes a Dynamic Graph draw operation.

Description:

This command draws a Dynamic Graph during program execution in accordance

with the drawing conditions defined within the program.

Summary of Contents for FX-7400GII





























































































































































































































































































































































































































Search results

Summary of Contents for FX-7400GII

Reviews:

Related manuals for FX-7400GII

Brands by name

Popular brands

Casio FX-7400GII, User Manual

Search results

Summary of Contents for FX-7400GII

Reviews:

Related manuals for FX-7400GII

Brands by name

Popular brands