Casio fx-7400G PLUS User Manual Download

Page: 78 / 218

Chapter 4

Graphing

Use the following View Window parameters.

Xmin = –8

Ymin = –30

Xmax = 8

Ymax = 30

Xscl

= 5

Yscl

= 10

1. After graphing the functions, press

(ZOOM), and the pointer appears on

the screen.

(ZOOM)

2. Use the cursor keys (

) to move the pointer to the location that

you want to be the center of the new display.

3. Press

(FACT) to display the factor specification screen, and input the factor

for the

- and

-axes.

(FACT)

4. Press

to return to the graphs, and then press

(IN) to enlarge them.

(IN)

This enlarged screen makes it clear that the graphs of the two expressions are not
tangential.

• Note that the above procedure can also be used to reduce the size of a graph

(zoom out). In step 4, press

(OUT).

Summary of Contents for fx-7400G PLUS



























































































































































































































Search results

Summary of Contents for fx-7400G PLUS

Reviews:

Related manuals for fx-7400G PLUS

Brands by name

Popular brands

Casio fx-7400G PLUS, User Manual

Search results

Summary of Contents for fx-7400G PLUS

Reviews:

Related manuals for fx-7400G PLUS

Brands by name

Popular brands