78
Appendix
Wi-Fi function
I can’t connect to
the wireless LAN.
The connection
drops out.
1) If the computer or wireless LAN router are too far from the
camera, it cannot maintain a connection.
2) The computer may be connected to another wireless device.
Check that this camera is selected in the Wi-Fi connection
settings on the computer (page 49).
3) The connection may drop out if there is a microwave oven,
cordless phone or other wireless device nearby. Keep the
camera well away from other devices when using it.
4) If none of the above problems apply and you still cannot
establish or maintain a connection, the camera may have been
damaged by an electrostatic discharge or similar event.
Other
The date and time
shown on the
screen and the
dates for recorded
files are incorrect.
The date and time settings are incorrect. Reset the date and time
(page 62).
The words shown
on the screen are
in a foreign
language.
The display language settings are incorrect. Reset the language
(page 62).
Images are not
imported when I
connect to the
computer via
USB.
1) The USB cable may not be securely connected. Check the
connectors and ensure that they are securely plugged in.
2) If the camera is not switched on, switch it on again.
3) If you connect the USB cable to the computer via a USB hub or
similar device, the camera may not be recognized correctly.
Connect the USB cable directly to a USB port on the computer.
4) You cannot communicate via USB when the battery level
indicator shows
. Recharge the battery before connecting
to the computer.
When I switch the
camera on, the
time setting
screen appears.
1) The camera is not set to the factory defaults, or the camera has
been left with the battery fully discharged. Configure the
settings correctly (pages 14, 20).
2) The memory management area inside the camera may be
corrupted. If so, use the Reset procedure to restore the default
camera settings (page 64). Then configure the settings. If the
time setting screen did not appear when you switched the
camera back on, the memory management area in the camera
has been successfully restored.
Various icons and
numbers appear
on the screen.
Such displayed items include the screen displays needed for
photography and information on images you have shot. Tapping
allows you to toggle between showing and hiding information
on the screen (page 10).
Symptoms
Probable cause and solution
