Playing Built-in Songs
EN-30
Use the following procedure to adjust the balance between
the volume of what you play on the keyboard and song
playback volume.
1.
Press
ct
(FUNCTION) and then use the
br
(10-key) [4] (
o
) and [6] (
p
) keys to display
“Song Vol” (page EN-7).
2.
Use the
br
(10-key) [–] and [+] keys to adjust
the song volume.
The procedure below lets you select the same keyboard tone
as the one being used in the song and play along with your
favorite tunes.
1.
After selecting a song, hold down
bp
(SONG
BANK) for about two seconds until the
displayed tone name changes to the tone name
of the song.
• If your currently selected tone is the same as the song
tone, the display contents will not change.
2.
Play along with song playback.
• If you select a song that uses different tones for left and
right hand play, the right hand part tone is assigned to the
keyboard.
You can turn off the right hand part or the left hand part of a
song during playback and practice playing along with the
remaining part.
1.
Press
bl
to select the part you want to turn off.
Each press of
bl
cycles through the settings shown
below.
2.
Press
bk
.
This starts playback in accordance with the setting you
selected in step 1.
• During playback with one part turned off, only the notes of
the part that is turned off are shown on the display.
You can load song data from an external device and increase
the selection of songs available on the keyboard. See the
following pages for more information.
• Memory card (page EN-59)
• Computer (page EN-68)
• For information about how to delete song data loaded from
an external device, see page EN-58.
Adjusting the Song Volume
Playing with the Tone as Song Playback
S o n
g
V o l
Turning Off the Part of One Hand for Practice
(Part Select)
Increasing the Selection of Songs
Right hand part off
Left hand part off
Both hand parts off
Both hand parts on
CTK860IN_A5_x1a_EN.indd 32
2014/07/10 18:06:41
