PAGE
29
29
29
29
29
MOVING THE CP-725
Unplug the CP-725 from the wall outlet if you
wish to move the unit. Place the handset in the
charging cradle after relocating the CP-725.
This will reset the CP-725's security code. All
autodial, Caller ID and redial numbers will be
saved.
MULTI-LINE
INSTALLATION
Installations with more than two lines, such as
business PBX or Key Systems, may require a
separate RJ11 jack for answering machines.
Please contact your telephone equipment
provider for additional information.
(See accessories, page 35)
ADDITIONAL INFORMATION
CLEANING THE CP-725
TWO-LINE
INSTALLATION
Two-line installations may require a two-line
T-adapter for the CP-725 to operate correctly.
The T-adapter allows you to connect your
machine to Line 1 or Line 2. The CP-725 will
only answer one line. (See accessories,
page 35)
CAUTION: Disconnect the CP-725 from the
power outlet before cleaning.
Use a damp cloth or moist sponge only to clean:
1. The antenna.
2. The plastic cabinet of the handset and
charging cradle.
3. The battery charging contacts on the
handset.
A mild soap, like dishwashing detergent, will
help remove grease or oil. Do not spray cleaners
directly onto the unit. Cleaners should only be
used on the plastic surfaces.
Thoroughly dry all parts of the handset and
charging cradle before re-using.
POWER FAILURE/
NON-VOLATILE
MEMORY
CASIO PHONEMATE’s memory backup system
maintains up to 20 autodial names and numbers
indefinitely until you erase them. This non-
volatile memory does not require battery power.
In a power failure, the rechargeable NiCad
battery will retain stored Caller ID and redial
information for up to 7 days, if fully charged.