PAGE
22
22
22
22
22
TRANSFER CALLER ID
TO AUTODIAL MEMORY
This feature allows you to transfer a phone
number from Caller ID memory directly into the
Autodial Memory. This saves you time and
eliminates the chance of entering an incorrect
phone number into memory. You can even edit
the name and number before you complete the
transfer.
NOTE: If you make a mistake or change your mind at any time
during this procedure, simply press
PROGRAM again to quit.
4
Press
CALLER ID
. The most recently
received Caller ID entry will appear in the
display:
J Edwards
C17
555 1234
5
Use the
DOWN
or
UP ARROW
KEY
to select the Caller ID entry you
wish to save:
6
You can either save the entry exactly as
it appears, or you can edit the name and/
or number. To save the entry without
any editing, just press
AUTO
. To edit
the entry, press the
RIGHT ARROW
KEY
and proceed as described in the
TO EDIT AUTODIAL ENTRIES section
(see page 20).
AUTODIAL
(continued)
1
Press
PROGRAM
. The "Program
Mode" display will flash on the screen:
PROGRAM MODE
NAME/DATE
PROGRAM
BATTERY
CALLER ID
2
Press the
RIGHT ARROW KEY
three
times (or just press
AUTO
). You will see
A01 flashing in the lower left-hand corner
of the display. (The rest of the display
may or may not be blank, depending on
the current contents of location #1):
DELETE
AUTO
CALLER ID
Greg Johnson
C10
555 6789
Jan Smith
A01
555
1212
3
Use the
DOWN
or
UP ARROW
KEY
to select the autodial location
where you wish to transfer the Caller ID
number. (Again, the rest of the display
may or may not be blank. If it is not
blank, the contents of this location will be
written over once you complete the
transfer.)
7
When you are finished, press
PROGRAM
to exit "Program" mode.
