PAGE
2
2
2
2
2
TO WALL JACK
USE ONLY WITH
ADAPTOR M/N-14
TONE PULSE
INITIAL SETUP
INSTALLATION
1
PLUG
the CP-725’s telephone cord into
a telephone wall jack.
2
CONNECT
the AC Adapter Plug into the AC
Adapter Outlet on the back of the CP-725 charging
cradle.
LOOP
the cord through the AC Adapter
Cord Holder to prevent accidental disconnection.
3
PLUG
the AC Adapter into an electrical
wall outlet. The LEDs on the charging
cradle will stop flashing when the
handset (with battery pack installed) is
placed in the cradle.
NOTE: If the telephone
cord is not properly plugged into the telephone wall
jack, the
CHARGING INDICATOR will flash when
the handset is out of the charging cradle.
