PAGE
3
3
3
3
3
RINGER ON/OFF
SWITCH SETTINGS
4
Press
PROGRAM
again to lock in
your selection.
3
Press the
DOWN
or
UP ARROW
KEY
to change the ringer setting (turn it
ON or OFF).
CALLER ID
2
Press the
RIGHT ARROW KEY
once. The "Ringer" display will appear,
for example:
NAME/DATE
PROGRAM
BATTERY
RINGER: ON
1
Press
PROGRAM
. The "Program
Mode" display will flash:
NAME/DATE
PROGRAM
BATTERY
PROGRAM MODE
Your CP-725's ringer is preset to
"ON". To reset the ringer to "ON" or
"OFF":
It may be necessary to set the
TONE/
PULSE SWITCH
. See below.
4
5
Fully extend the charging cradle antenna
for clear reception.
TONE/PULSE SWITCH
This switch tells the CP-725 to dial out with
either touchtone or pulse signals to match the
service you have with your local telephone
company. The CP-725 is shipped with the
TONE/PULSE SWITCH
in the TONE
position. If you do not have touchtone service,
set the switch to pulse on the back of the
charging cradle.
TONE PULSE
TONE = for Touchtone systems
PULSE = for Rotary dialing or Pulse systems
