English
Using Built-in Tones
E-11
1.
Press the
3
(METRONOME)
button.
This will start the metronome.
2.
Press the
3
(METRONOME)
button again to
stop the metronome.
Changing the Beats Per Measure
You can specify from two to six beats per measure for
the metronome. After you do, a chime will sound at the
beginning of each measure. Specifying 0 for this setting
will sound a straight beat, without a chime. This setting
lets you practice with a steady beat.
1.
Hold down the
3
(METRONOME)
button
until the number of beats per measure screen
shown below appears on the display.
2.
Use the
ct
(
w
,
q
)
buttons to select the
beats per measure value you want.
3.
Press the
3
(METRONOME)
button to exit
the number of beats per measure screen.
Changing the Tempo Setting
There are two different methods you can use to change
the tempo setting: by pressing
ck
(
q
)
(faster) and
ck
(
w
)
(slower) buttons or by tapping a beat with a
button.
■
To adjust the tempo using
ck
(TEMPO,
w
,
q
) buttons
1.
Use the
ck
(TEMPO,
w
,
q
)
buttons to
adjust the tempo setting.
Each press of a button increases or decreases the beats
per minute value by one.
•
Holding down either button changes the value at
high speed.
•
You can specify a tempo value in the range of 20 to
255.
■
To adjust the tempo by tapping a beat
1.
Tap the
ck
(TEMPO, TAP)
button four times
in time with the beat you want to specify.
•
The tempo setting will change in accordance with the
timing of your tapping.
•
After you use this method to specify the approximate
tempo, you can then use the procedure under “To
adjust the tempo using
ck
(TEMPO,
w
,
q
)
buttons” to adjust the setting to a more exact value.
Using the Metronome
Lights with the first beat
of each measure
Lights with each
subsequent beat of
each measure
Tempo value
Tap four times
AP650_e.book 11 ページ ２０１２年７月１７日 火曜日 午後４時５分
