Casera PR-803, Instruction Manual

Page: 5 / 12

3 4
Attachments
COMBS
1. To attach the comb, hold the appliance with its teeth upward and slide it onto and along the
clipper blade until the front of the comb firmly sits against the clipper blade.
2. To remove the comb, simply pull the comb upward and away from the clipper blade.
Note: For even cutting, allow the comb attachment/cutter to cut its way through the hair. Do not
force it through quickly. Also remember to comb the hair frequently to remove trimmed hair and to
check for uneven strands.
STEP 1 - BACK OF THE NECK
1. Attach either the 3mm or 7mm comb attachment
2. Hold the clipper cutting edge pointed up and begin the haircut, starting at the centre of the
head at the base of the neck (see diagram 1 on the next page).
3. Hold the clipper comfortably in your hand and hold lightly against the head with the comb
teeth pointing upward. Gradually and slowly lift the clipper, working upwards and outwards,
through the hair, trimming just a little at a time.
4. As you cut, gradually lift the hair clipper head towards you. Continue to cut the back area
from the bottom of the neck upwards to the top of the ears.