Engine - Exhaust Gas Recirculation (EGR) - Diesel Particulate Filter (DPF) exhaust treatment
Measurements to respect for installing the filter — Legend of components — Legend of sensor fixing holes:
1.
308.6 mm
(
12.1496 in
)±
1.5 mm
(
0.0591 in
) Distance between the two bands of the cradle, the one with the set
fixing holes
(10)
and the one with the adjustable fixing holes
(11)
.
2.
46 mm
(
1.8110 in
)±
1 mm
(
0.0394 in
) Distance between the centre of the turbine or the centre of the union of
the decoupler/turbine and the adjustable filter fixing bushings
(12)
.
3.
134 mm
(
5.2756 in
)±
1 mm
(
0.0394 in
) Distance between the centre of the turbine or the centre of the union /
turbine and the band supporting surface
(4)
with set fixing holes on the filter support.
4.
Band supporting surface with set fixing holes.
5.
Initial part of the DPF filter, connected with the sleeve.
(15)
to the turbine.
6.
Middle part of the DPF filter, inside which there is the ceramic part to clean.
7.
End part of the DPF filter, connected with the sleeve.
(14)
to the exhaust pipe.
8.
Clamp retaining the middle part
(6)
\ end part
(7)
.
9.
Clamp retaining the middle part
(6)
\ initial part
(5)
.
10. Band with the set fixing holes.
11. Band with the adjustable fixing holes.
12. Threaded bushings, screwing them in or out enables changing the adjustment distance
(3)
.
13. Grub screw fixing the bushing
(12)
.
14. Filter outlet union, it is inserted on the exhaust pipe.
15. Union joining the filter to the turbine.
16. Clamp fixing the union
(15)
to the filter.
17. Tutor, protects the decoupler during the handling from the supplier, it is dismantled after assembly (it is advised to
keep one to hand and to reassemble it before starting to disassemble the filter so that the decoupler undergoes
no deformation).
18. Gas pressure detection after the middle part of the filter, the pipe that goes on the differential pressure sensor is
connected here.
19. Gas pressure detection before the middle part of the filter, the pipe that goes on the differential pressure sensor
is connected here.
20. Exhaust gas temperature sensor from the turbine.
21. Exhaust gas temperature sensor to the intake of the middle part of the filter.
22. Lambda sensor.
47841819 24/02/2015
10.3 [10.501] / 5
Summary of Contents for FARMALL 105U EP
Page 6: ...INTRODUCTION 47841819 24 02 2015 1 Find manuals at https best manuals com...
Page 9: ...INTRODUCTION 47841819 24 02 2015 4 Find manuals at https best manuals com...
Page 41: ...47841819 24 02 2015 10 2 10 216 10...
Page 61: ...This as a preview PDF file from best manuals com Download full PDF manual at best manuals com...
