Case FARMALL 105U EP, Service Manual, Page: 59 / 61

Engine - Exhaust Gas Recirculation (EGR) - Diesel Particulate Filter (DPF) exhaust treatment
12. Loosen the clamp (1) fastening the exhaust pipe to the
DPF filter.
MOIL12APL99
9
13. Using a belt, sling the muffler, at two points at least,
take up the slack with a hoist. Take out the screws
(2) fastening the exhaust pipe (1) to the support (3) .
Then extract all of the pipe from the right-hand side of
the tractor and put it down on a pallet on the ground.
MOIL12APL100
10
14. Put two eyebolts (1) on the screws retaining the upper
heat shield of the filter. Using a chain, hook on the filter
and take up the slack in the chains.
MOIL12APL101
11
15. On the left-hand side, under the filter remove the two
screws (1) on the adjustment bushings (3) of the filter
left support (2) .
NOTE: After taking out the screws, unscrew the bushings
so as to create a gap between the filter assembly and the
left support.
MOIL12APL102
12
47841819 24/02/2015
10.3 [10.501] / 18