Case FARMALL 105U EP, Service Manual

Page: 15 / 61

Engine - Engine and crankcase
GENERAL SPECIFICATIONS 4 Cylinders
Intake:
− start: before P.M.S.
− end: after P.M.I.
19 °
37 °
Exhaust:
− start: before P.M.I.
− end: after P.M.S.
61 °
21 °
Clearance between valves and rocker arms with
engine cold. The valve clearance is hydraulically controlled. Therefore,
manual adjustment is not necessary.
Turbocharging Turbocharged with intercooler
Air cleaning dual cartridge dry air cleaner, with clogged filter indicator with
centrifugal pre-filter and automatic dust ejector
Fuel filtration by mesh prefilter on the supply pipe, suction line filter with
water - fuel separator, low pressure filter and sensor.
Priming pump
Injection pump
Type
Nozzles type
Injection pressure Manual mounted on the suction line filter
BOSCH
High pressure Common Rail control unit HPCR - CP4.1
Electro-injectors
300 - 1400 bar ( 4350.00 - 20300.00 psi )
Filling:
Engine sump
Fuel tank
6.4 - 8.1 l ( 1.69 - 2.14 US gal )
140 l ( 36.98 US gal )
Anti-pollution system
Type:
Exhaust gas recycling system EGR
Particulate filter DPF*
Recommended frequency for renewing filter every 3000 hours
NOTE: * - For filter maintenance please refer to: ( Diesel Particulate Filters (DPF) - Dynamic description manual
regeneration of the diesel particulate filter (DPF) (55.408) )
47841819 24/02/2015
10.1 [10.001] / 4