Case IH MAXXUM 110 EP, Service Manual

Page: 41 / 81

Engine - Engine and crankcase
M10 33 ± 5 (24.3395 ± 3.6878)
Fan pulley fastener
-
Fan spacer or accessory pulley fastener (when required)
M6
10 ± 2 (7.3756 ± 1.4751)
M10 43 ± 6 (31.7152 ± 4.4254)
M12 77 ± 12 (56.7923 ± 8.8507)
Additional counterweight fastener (refer to figure 11 )
M10 1.5x80 48 ± 8 (35 ± 6)
M10 1.5x100 48 ± 8 (35 ± 6)
Alternator fastener
M8 1.25x30 9.8 Fig Hex
24 ± 4 (17.7015 ± 2.9502)
M12 1.75x120 10.9 Fig Hex 43 ± 6 (31.7152 ± 4.4254)
M12 Nut 1.75 G Fig Hex 24 ± 4 (17.7015 ± 2.9502)
M10 1.5x25 9.8 Fig Hex
-
M10 1.5x40 9.8 Fig Hex
-
M10 Nut 1.5 9 Fig Hex
-
M16 1.5 Hex
-
Stud bolts for mounting fuel pump:
M8
12 ± 2 (8.8507 ± 1.4751)
Bolts securing injection pump:
M8 1.5
24 ± 4 (17.7015 ± 2.9502)
Tightening nut fixing injection pump gear
M18 1.5
105 ± 5 (77.4440 ± 3.6878)
Fastener for fittings from injection pump to Common Rail:
M12 1.5
20 ± 2 (14.7512 ± 1.4751)
Bolts securing injectors: Electronic Engine 8,5 ± 0,8
Bolts securing injector connectors:
1,5 ± 0,25 (1.1063 ± 0.1844)
Oil pressure regulator sensor fastener: 8 ± 2 (5.9005 ± 1.4751)
Camshaft speed sensor fastener in gearbox:
M6
8 ± 2 (5.9005 ± 1.4751)
Crankshaft speed sensor fastener on front cover
M6
8 ± 2 (5.9005 ± 1.4751)
Temperature sensor fastener on cylinder head:
M14 1.5x12 Hex
20 ± 3 (14.7512 ± 2.2127)
Air temperature sensor fastener on intake manifold:
M6 1x20
3 ± 1 (2.2127 ± 0.7376)
Air pressure and temperature sensor fastener on intake manifold:
M5
3 ± 1 (2.2127 ± 0.7376)
Fuel pressure sensor fastener: 35 ± 5 (25.8147 ± 3.6878)
Fuel temperature sensor fastener:
M14 1.5x12 Hex
20 ± 3 (14.7512 ± 2.2127)
Gear fastener on air compressor:
5/8 in 18 Unf 125 ± 19 (92.1953 ± 14.0137)
Air compressor fastener on crankcase:
M12 Nut
81 ± 12 (59.7425 ± 8.8507)
♦ Lubricate with engine oil before assembly
Tightening sequence for 6 cylinder head bolts
47665854 27/03/2014
10.1 [10.001] / 6