Page 6 of 6
TROUBLESHOOTING
CARE AND MAINTENANCE
Clean the glass and coated metal surfaces with a non-abrasive cleaner. Do not use any cleaners with chemicals,
solvents or harsh abrasives, The motion detecting lens is coated with a specially painted finish and requires special
care when cleaning. Use only a soft dry cloth to dust or wipe the lens area.
---In TEST mode, the light stays on over 5 seconds after motion is no longer detected:
1. Cover the sensor with a dark color cloth to verify that motion is not detected.
2. The TEST mode may have expired. If you want to reactivate the TEST mode, reboot the power
---In AUTO Mode, the light stays on during the day:
1. The light may be in TEST mode. Stay out of the detection range for 5 minutes, which will allow conversion to
AUTO mode.
---In 3H or 6H Mode, the light is still on full brightness, even though it has been 3 hours or 6 hours after dusk:
1. Make sure there has not been an interruption in the electrical power, i.e. the wall switch has not been switched off
and turned back on at some point or the circuit breaker had not shut down.
---After performing 3H or 6H Mode, the light stays on full brightness after 3 minutes:
1. Make sure there is no movement that could be picked up by the sensor.
2. Adjust the delay time knob counterclockwise to reduce the delay shut-off time.
---In Manual override, the light stays on after dawn:
1. The ambient light level may be too low due to overcast skies.
5-YEAR LIMITED WARRANTY:
All products are warranted to be free of defects in material and workmanship for five (5) years from date of
purchase. This warranty is limited to the correction of any such defect, or the replacement of any such defective
item(s), provided that: (a) we are properly notified and consent to return of the item(s) in question:(b) the item (s)
is / are returned with proof of purchase date; and (c) it is found upon inspection by us that the item (s) is / are defective
as noted above. This warranty dose not cover labor costs, consequential damages, nor dose it apply to any item(s) that
have been improperly installed, overloaded, altered, or otherwise abused by the customer, its agent(s) or emplyee(s).
Finishes are specially excluded from the terms of this warranty since they are subject to environmental maintenance
deemed beyond our control. Other than the described obligation, we assume no further liability with respect to the sale
or use of our products.We make no warranty, express or implied, and disclaim any warranty of merchantability or fitness
for a particular purpose.
