9
4. Attach the Rear Stabilizer & the Rear Handle
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the bolts are fully
tightened with the allen key.
!
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the rear stabilizer is
fully tightened with
the allen key.
!
4-1. Attach the Rear Stabilizerr
Remove the
r
four M8 x 20mm Hex Socket Head Bolt
(B5)
&
M8 x 16mm x1.5mm Flat Washer (B7)
from
both sides of the rear end
Rower Track
with the 6mm
Allen Key provided as shown.
Attach the
r
Rear Stabilizer (C)
to the rear end of the
Rower Track with
four M8 x 20mm Hex Socket Head
Bolt (B5)
&
M8 x 16mm x1.5mm Flat Washer (B7)
then
tighten these bolts with the 6mm Allen Key securely.
4-2. Attach the Rear Handle
Remove the
r
four M6 x 16mm Hex Socket Head Bolt (B9)
from the
Rower Track
with the 5mm Allen Key provided as shown.
Attach the
r
Rear Handle (G)
to the centre position of the
Rower
Track
with four
M6 x 16mm Hex Socket Head Bolt (B9)
then
tighten these bolts with the 5mm Allen Key securely.
Cut off the
r
Cable Tie
which secured the
Seat Carriage Assembly
in
front end of the
Rower Track
.
FIXINGS:
FIXINGS:
x
4
FIXINGS:
TOOLS:
Part
No.
B9
FIXINGS:
FIXINGS:
x
4
FIXINGS:
TOOLS:
Part
No.
B5
x
4
Part
No.
B7
Rower
Track
Rower
Track
Seat Carriage
Assembly
LUBRICATE BEFORE ASSEMBLY
LUBRICATE BEFORE ASSEMBLY
cascadehealthandfitness.com
H E A L T H & F I T N E S S
R
Summary of Contents for AIR ROWER UNLIMITED MAG.
Page 28: ...Exploded Diagram 28 cascadehealthandfitness com...
Page 31: ......
Page 32: ...H E A L T H F I T N E S S R...
